 |
About us
Download catalog
(PDF-format)
(PDF-format)
SM Road Header
constantly improved development which meets the requirements of the modern mining.
Hydraulic cylinders: technical specifications
| Hydraulic legs | |
| Tube diameter (mm) | from 160 till 400 |
| Stroke (mm) piston | from 150 till 2000 |
| Operating pressure (MPa) | 32 |
| Hydrolic cylindes | |
| Tube diameter (mm) | from 63 till 400 |
| Stroke (mm) piston | from 50 till 2000 |
| Operating pressure MPa | 32 |
Pneumatic hand held roofbolter: technical specifications
| Param | Value |
| Overall dimensions in transport position (mm) | 1410 х 320 х 270 |
| Weight with standard/long leg (kg) | 38/40 |
| Maximum extension of standard/long leg (mm) | 2880 or 3660 |
| Operating air pressure (mPa) | 0,63 |
| Drilling diameter max (mm) | 35 |
| Maximum torque (Nm) | 160 |
| Air consumption (m³/min) | 5,9 |
| Minimum thrust (n) | 10000 |
| Noise level, ≤ (dB) | 85 |
The hand held pneumatic drill: technical specifications
| Param | Value |
| Dimensions (mm) | 230 х 270 х 210 |
| Weight (kg) | 8 |
| Operating air pressure (mPa) | 0,63 |
| Power of engine (kW) | 5,2 |
| Rotational speed (rpm) | 1250 |
| Air consumption (m³/min) | 5,4 |
Road header: technical specifications
| Param | Value |
| Height (mm) | 1790 |
| Length (mm) | 8050 |
| Width without apron (mm) | 2105 |
| Apron width (mm) | 2000 (3000) |
| Weight (kg) | 32000 |
| Cutting height (mm) max | 4087 |
| Cutting width (mm) max | 5005 |
| Recommended cutting height (mm) | 2000 – 3800 |
| Inclines up to | +18 -18 |
| Tramming speed (m/min) | 0 - 6 |
| Ground pressure (N/sm2) | 13,5 |
| Installed electric motor capacity (total) | 232,5 |
| Cutter motor (kW) | 150 |
| Voltage (V) | 660 |
Conveyors: technical specifications
| Param | Value |
| Productivity (T/min) | 5,5 |
| Belt width (mm) | 800 |
| Belt speed (m/sec) | 1,76 |
| Drive drum pulley diameter (mm) | 440 |
| Tension drum pulley diameter (mm) | 270 |
| Gearbox | (|=19,6) |
| Electric motor (kw) | 15 |
| Weight without belt (with 6 linear sections, kg) | 3895 |
| Weight of the linear loading section (kg) | 565 |
| Weight of the linear angle section (kg) | 130 |
| Weight of the linear angle belt section (kg) | 220 |
| Weight of the linear angle unloading section with the carriage section (kg) | 1680 |
Useful sections |
News |
Contact:
|
All rights reserved. 2009. «Reyzin» Group
Site development: RosBusinessDesign |